CHAPTER 3 Work before Operating System Installation 3.4 Partition Configuration

FIGURE 3.26 Example of [Partition Configuration] Window

Remark

Above mentioned window is used in case of maximum configurations.

2.Select partition which sets the partition name and enter the partition name in [Partition name] cell.

Remark

The name can be input up to 16 characters. The characters that can be used are as follows. [0-9], [a-z], [A-Z], half-width space, # (Sharp), _ (Underline), and – (Hyphen)

3.Click [Set Partition Name] button.

Name is set for the selected partition.

3.4.5Various mode settings

Dynamic Reconfiguration, Memory operation mode, and Hyper Threading Mode, etc. of the partition are set. Setting items are set by MMB Web-UI and UEFI. Following table lists the setting items and screen transition.

For details on the respective settings, see PRIMEQUEST 2000 series Tool Reference (C122-E177EN)

40