CHAPTER 2 Preparing for Main Unit Installation 2.9 Connecting the Power Cables

Release tie can be detached by bending it with the choke end of the zip tie.

3.Group all the cables that run outside the main unit and PCI_Box into power cables and signal cables, and secure them firmly to the cable holders of the 19-inch rack with cable ties.

4.Confirm that the AC power breaker is off. Then, connect the power cables to AC power. For details on the power cable connections, see 2.4.2Facility power requirements and characteristics”.

FIGURE 2.1 Power cable socket locations (PRIMEQUEST2000 Series)FIGURE 2.2 Power cable socket locations (PCI_Box)

7