CHAPTER 6 Work after installation

6.1 Redundant configuration of network adaptor

CHAPTER 6 Work after installation

This chapter explains the operation which is to be implemented after introducing the PRIMEQUEST 2000 series, such as setting of NTP or setting of security.

6.1Redundant configuration of network adaptor

For establishing the network after installation, following teaming (multi-pass) is set by using the utility corresponding to each network adaptor.

Setup of network adaptor (Intel Gigabit Ethernet (GbE))

For management LAN and operation LAN, redundant setting of network is done. Network to be targeted is (2) in the following Figure.

-Windows: Configure the teaming by using the Intel PROSet (R) (*1). For details, see help of IntelPROSet (R).

*1: In Windows Server 2012 or later, NIC teaming of standard function of the operating system, can also be used.

FIGURE 6.1 External network configuration

Number

Description

(1)

Switching Hub redundancy

(2)

redundancy by teaming(such as GLS)

(3)

Standby side is disabled

Note

There are some notes on teaming with IntelPROSet (R).

For the details on the notes, see “G.9 NIC (Network Interface Code)” of PRIIMEQUEST 2000 Series Administration Manual (C122-E175EN)

94