CHAPTER 4 Installation of Operating System and bundled software
4.11 Procedure to install SUSE Linux Enterprise Server 11 Service Pack 3 into the Internal HDD
4.11 Procedure to install SUSE Linux Enterprise Server 11 Service Pack 3 into the Internal HDD
This section concisely describes the procedures for installing SUSE Linux Enterprise Server 11 Service Pack 3 (referred to below as SLES11 SP3) on the internal HDD. Confirm the MMB configuration and successful login to the MMB before starting the installation.
4.11.1 Presetting
If necessary, the following settings are done.
1.Remove each internal HDD that is not the installation destination.
2.The setting of partition is checked by MMB.
-Setting of configuration of SB/IOU
See “3.4.1 Setting the partition configuration”
-Setting of Console Redirection
See “3.4.6 Settings of Console Redirection”
-Video redirection: Enable
-Virtual media: Enable
-Setting of various modes
See “3.4.5 Various mode settings”
3.[PCI ROM Priority] of BIOS is set.
-For the UEFI Install
-Set [Device
-For the UEFI Install:
-Set [Device
-Set [Device
4.The I/O space is allocated in the SAS card and in the SAS RAID controllerRAID card.
For details on allocation of I/O space, see “3.4.5 Various mode settings” and “5.5.1 [Configure I/O Space Assignment] menu” of PRIMEQUEST 2000 series Tool Reference
4.11.2Preparing for Installation
Prepare the SLES11 SP3 installation DVD.
4.11.3 Installation
The operating system installation with SVIM is explained.
There are the following types for operating system installation with SVIM. For the detailed procedure of each mode, see ServerView Suite ServerView Installation Manager.
TABLE 4.8 Operating system installation with SVIM
Mode |
| Functional Overview | Purpose |
| |
Quick mode |
| The operating system can be installed with the recommendation | It is used when the operating system is |
| |
|
|
| of Fujitsu only by setting minimum required limits. | to be readily installed. |
|
|
|
|
|
|
|
|
| 70 |
|
| |