Fujitsu 2000 Selection of Filters of Editing objects, 6.4Set up of SMTP, 6.5Set up of security, FIGURE 6.4 Example of [Access Control] Window, Operations, Operations

CHAPTER 6 Work after installation 6.4 Set up of SMTP

6.4Set up of SMTP

See “3.3.9 Set up of Alarm E-Mail ”for configuration of SMTP.

6.5Set up of security

This section describes how to make the necessary settings to ensure security and notification of errors during operation. Configure the security necessary for operation.

It is recommended to take the back-up of the set-up information when below mentioned set ups are completed. See “3.5 Save structural information” for the back-up of the set information.

-6.5.1 Set up of access control

To secure the security of the MMB, set up access control according to Network Protocol.

For securing the security, it is recommended to set up access control at the time of installation. Access control can also be set up after the installation.

Selection of Filters of Editing objects

Operations

1.Click [Network Configuration] - [Access Control].

→ [Access Control] window is displayed. For the details of [Access Control] window, see “1.5.10 [Access Control] window” of PRIMEQUEST 2000 series Tool Reference (C122-E177EN)

FIGURE 6.4 Example of [Access Control] Window

2.Filters of editing objects are selected by radio button.

Addition and editing of filters

Operations