1Turn off power to your LifeBook notebook, and remove any power adapter (AC or auto/airline), battery pack, and modem connection.

2Place your LifeBook notebook with the bottom facing up on a clean work surface.

3Remove the two screws from the holes in the memory compartment cover. (Figure 19)

Figure 19. Removing the Memory Compartment Cover

Removing a Memory Module

1Perform steps 1 through 3 of Accessing the Memory Compartment.

2Pull the module clips sideways away from each side of the memory module simultaneously. (Figure 20)

3While holding the clips out, remove the module from the slot by lifting it up and pulling towards the back of your LifeBook notebook.

4Store the memory upgrade module in a static guarded sleeve.

5Install a new memory module as detailed in the procedure below.

6Replace the memory compartment cover. (Figure 22)

67 - Memory Upgrade Module

Page 67
Image 67
Fujitsu P8010 manual Removing a Memory Module, Removing the Memory Compartment Cover