Fujitsu ST5112 manual Connectors and Peripheral Interfaces, Connector Tablet PC Purpose Peripheral

S t y l i s t i c S T 5 1 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n O n e

CONNECTORS AND PERIPHERAL INTERFACES

Connectors and peripheral interfaces on the Stylistic ST5100 Series Tablet PC allow the connection of a variety of devices. Specific locations are illustrated in Figures 1-2 through 1-5.

Table 1-6 provides a description of each peripheral connector on the Stylistic ST5100 Series Tablet PC. Each of the illustrated icons is either molded into or printed on the Tablet PC chassis.

Connector/	Tablet PC		Purpose
Peripheral		Icon
DC input			Connect an external power source such as the AC adapter or auto/airline
connector			adapter.
USB Port			Connect Universal Serial Bus 2.0 compliant devices to the Tablet PC.
PCMCIA			Insert a Type I or Type II PC Card.
Card slot
SD Card/			Insert a Secure Digital (SD) Card or a Memory Stick.
Memory Stick
slot
Microphone jack			Connect an external microphone. The internal microphone is disabled when you
			plug in an external microphone.
Headphone jack			Connect stereo headphones or powered external speakers. The internal speaker
			is disabled when you plug in external headphones or powered speakers.
IrDA/FIR port			An infrared transceiver built into the Tablet PC allows you to communicate with
			other devices that are compliant with the IrDA Standard Rev. 1.1. Effective range
			for infrared communication is about 3 feet, and within 15 degrees off center. A
			clear line-of-sight path must exist between the IrDA port on the Tablet PC and
			the IrDA transceiver on the other device.
Modem			Connect a telephone line to the optional internal modem using a standard RJ-11
			telephone plug.
Tablet Dock port			Connect the Stylistic ST5100 Series Tablet Dock or other approved docking
			device. Refer to documentation accompanying the docking device for more
			information.
Infrared			An infrared receiver built into the Tablet PC allows you to communicate with a
keyboard/			Fujitsu wireless infrared keyboard or mouse. The keyboard infrared port works
mouse port			optimally when it is placed between 10 to 30 cm (approximately 4 in. to 12 in.)
			from the keyboard infrared port (which is located on the bottom edge of the
			Tablet PC). Ensure there is a clear line-of-sight path between the infrared receiver
			on the Tablet PC and the infrared transmitter on the keyboard or mouse. Note
			that an infrared keyboard or mouse works best when the system is in landscape
			orientation.

20