Fujitsu ST5112, ST5111 manual Starting Transmission, Atheros Wireless LAN

S t y l i s t i c S T 5 1 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x A

Wireless LAN

On/Off

Switch

Figure A-3. Wireless LAN On/Off Switch

To restart transmission, select [On] for the wireless communications Switch Radio: function, and then click the [OK] button.

Atheros Wireless LAN

1.Click [Start] --> [All Programs] --> [Atheros] --> [Atheros Client Utility].

2.Click [Action].

3.Click [Disable Radio]. Wireless communications on/off switching will be deactivated and the trans- mission of radio waves from the wireless LAN will be stopped.

To restart transmission, check the [Enable Radio] checkbox to select it., then click the [OK] button.

STARTING TRANSMISSION

To communicate using the wireless LAN function, set the computer to a status from which it can transmit, as follows:

Intel PROSet Wireless LAN:

1.Set the wireless switch to the On position.

2.Click [Start] --> [(All) Programs] --> [Intel Net- work Adapters] --> [Intel(R) PROSet]. The Intel(R) PROSet window will be displayed.

3.Click the [General] tab if it is not already selected.

4.Select [ON] for the Switch radio: function, then click [OK]. Wireless communications on/off switching will be activated and the transmission of radio waves will be restarted.

Atheros Wireless LAN:

1.Click the Wireless Network Connection icon in the system tray at the lower right of your screen.

2.Click [Enable Radio]. The radio will be turned on. Access Point Mode: Transmission is enabled.

Ad Hoc Mode: Restart your computer to enable the radio.

56