Fujitsu ST5111, ST5112 manual Shutting Down the System, Suspending System Operation

Models: ST5112 ST5111

1 96
Download 96 pages 20.54 Kb
Page 35
Image 35

Registering Windows XP with Microsoft

In order to ensure that you receive the most benefits from the Windows operating system, it should be registered the first time you use it.

After you receive the Windows Welcome screen, you will be prompted to enter registration information in the following order.

First of all, you will need to read and accept the End User License Agreements (EULAs). After accepting the EULAs, you will be asked if you want to enable the Automatic Updates feature. Acceptance of this feature is recom- mended because it allows your system to be updated automatically whenever an important change becomes available for your tablet.

If you reject the terms of the license agreements you will be asked to review the license agreements for information on returning Windows or to shut down your tablet.

You cannot use your tablet until you have accepted the License Agreements. If you stop the process your tablet will return to the beginning of the Windows Welcome Process, even if you shut your tablet down and start it up again.

U s i n g Y o u r S t y l i s t i c S T 5 1 0 0

SHUTTING DOWN THE SYSTEM

Follow these steps to shut down/turn off your system:

1.If system operation has been suspended, resume system operation. See “Resuming System Operation” later in this chapter for details.

2.Save your work and close all running programs.

3.Choose Shut Down from the Windows Start menu.

4.Carry out the Shut Down command.

The system is now in the Off state.

SUSPENDING SYSTEM OPERATION

The Tablet PC allows you to suspend the system opera- tion without closing programs or exiting the operating system. Use this feature to conserve battery power when a system shutdown is not practical or when the battery needs to be changed.

If you have set your system to turn power off from the Power Options utility in the Control Panel, the following procedure will not be possible, since pressing the button shuts the system down rather than suspending it. To change your power options, go to Start -> Settings -> Control Panel -> Power Options.

Several additional windows will appear, prompting you to enter a name and description for your computer, an Administrator password, and a domain name. Read the instructions on the screens carefully and fill in the infor- mation as directed.

You will then be automatically connected to the Internet, if you have an appropriate connection available. If an automatic connection is not possible, you will be asked about how you dial out from where you will be using your tablet. If you are not connected to a phone line and plan to register at a later time, you may click the Skip button.

Once you are connected to the Internet, you will be asked if you wish to continue with the registration. If you select Yes you will then enter your name and address, and email address if desired. Click Next to complete registration.

REGISTERING YOUR STYLISTIC

TABLET PC WITH FUJITSU

You can register your tablet by going to our website at:

us.fujitsu.com/computers

You will need to be set up with an Internet Service Provider (ISP) to register online.

To suspend system operation:

1.Press the Suspend/Resume button, or carry out the Standby command from your operating system or power management program. (If your system is configured to suspend operation using Hibernate mode, which is explained later in this procedure, a message is displayed while data is saved to your hard disk.)

If you are replacing the battery, wait until

system operation is suspended and the

power icon is flashing before you remove the battery. Failure to do so could result in loss of your unsaved data. (Note that if the Resume On LAN function is enabled in the BIOS setup, you should not remove the battery unless the system is shut down. When Resume ON LAN is enabled, the bridge battery is disabled in order to optimize battery life.)

2.The Power icon either flashes (Standby) or is not displayed (Hibernate) when system operation is suspended, depending on how your system is config- ured. At this point, programs that were running are stopped, active data is saved, and the system enters one of two different low-power states, or standby modes, as explained in the following paragraphs.

27

Page 35
Image 35
Fujitsu ST5111 Shutting Down the System, Suspending System Operation, Registering Your Stylistic Tablet PC with Fujitsu