Care and Maintenance
This chapter gives you pointers on how to care for and maintain your Stylistic ST5100 Series Tablet PC.
■Do not remove any screws from the memory upgrade module compartment except the ones specifically shown in the directions for installing and removing the memory upgrade module.
■The memory upgrade module can be severely damaged by electrostatic dis- charge (ESD). To minimize risk to the module, observe the following precau- tions:
■Before docking or undocking your system (when using a Tablet Dock), it is good practice to always touch a grounded metal object to discharge static electricity built up in your body.
■Before handling a memory module, touch a grounded metal object to discharge static electricity built up in your body.
■When installing or removing a memory module, hold it by the edge so as not to touch any contacts or chips. Be careful not to touch any internal computer terminals or components; the oil from your fingers could cause a short to the components.
■Be sure to power down your system before adding or removing memory modules. Even if the system is in hibernate or standby states, data could be lost or the memory could be damaged if power is still available to the system.
CARING FOR YOUR TABLET PC
Please note the following information regarding proper treatment of your Tablet PC:
■Your Tablet PC is a durable but sensitive electronic device. Treat it with respect and care.
■Make a habit of transporting the system in a suitable carrying case.
■Do not attempt to service the computer yourself. Always follow installation and operation instructions closely.
■If you accidentally spill liquid on your Tablet PC:
1.Turn it off.
2.Position it so that the liquid can run out.
3.Let it dry out for 24 hours, or longer if needed.
C a r e a n d M a i n t e n a n c e
4.If your Tablet PC will not boot up after it has dried out, call your support representative.
■Do not use your Tablet PC in a wet environment (near a bathtub, swimming pool).
■Always use the AC adapter and batteries that are approved for your system.
■Avoid exposure to sand, dust and other environmental hazards.
■Do not expose your Tablet PC to direct sunlight for long periods of time as excessive temperatures may damage your system.
■Do not put heavy or sharp objects on the computer.
■Do not carry your system in a bag or briefcase while it is running; doing so could result in overheating or hard disk drive problems.
■If you are carrying your system in a briefcase, or any other carrying case, make sure that there are no objects in the case pressing on the display.
■Do not drop your Tablet PC or touch the screen with any sharp objects.
PROTECTING THE DISPLAY SCREEN
The Stylistic ST5100 Series Tablet PC is designed to provide you with years of service. Using a screen protector will help ensure the screen remains as clear as possible. When installed, the screen protector becomes a durable, replaceable writing surface that protects the display screen from abrasion.
To obtain additional screen protectors, use Fujitsu part number FPCSP08AP
During normal use of the Tablet PC, small particles from the environment can become embedded in the pen tip and scratch the screen. To prevent scratching the screen, ensure that a screen protector is installed before using your Tablet PC. The warranty does not cover a scratched screen.
To install a new screen protector on your Tablet PC:
1.If a screen protector is already installed on the display screen, remove it before installing the new screen protector.
The screen protector is held onto the display screen surface by a thin strip of adhesive around the edges. A notch in one corner of the screen protector allows you to slide your fingernail under the screen protector for easy removal.
39
