Fujitsu ST5111, ST5112 manual Status Display, Icon Mode/State LED State Remarks

STATUS DISPLAY

Icons appear under each of the system status LEDs in the status display indicating the status of system functions such as system power and battery charge level. The loca- tion of icons in the Status display is shown in Figure 1-7.

Table 1-1. explains how the LEDs associated with the individual icons are displayed, and describes what the variations of that display indicate. (If an icon is not displayed, it indicates that the related system function is off or inactive.

G e t t i n g S t a r t e d

Power		Battery		Security
	Charge/DC In		HDD Access

Figure 1-7. Status Display Icons

In the following table, a “blinking” LED flashes at the rate of once per second; an LED that is “blinking, slow” flashes at the rate of one second on, five seconds off.

Icon		Mode/State	LED State	Remarks
Power		• On State	Green, continuous	The system is powered on and ready for
		• Idle Mode		use.
		• Standby	Green, blinking	The system has suspended and saved active
				settings to RAM.
		• Off State	Off	The system has suspended and saved
		• Hibernate		settings and data to the hard disk drive.
Charge/DC		• On State	Amber	AC adapter and battery are available and
	In	• Idle Mode		system is charging.
			Green	• AC adapter and battery are available
		• Standby
				and system is not charging (battery fully
		• Hibernate		charged).
				• AC adapter is available but battery is
		• Off State
				not present.
			Amber, blinking	AC adapter and battery are available and
				waiting to charge (battery is out of thermal
				range).
			Off	AC adapter is not available.

11