Fujitsu V4.90 Requirements at a managed server with RSB S2 /RSB S2 LP 3 HU, Connection to server

Working with the Remote Management Frontend Connection to server

Requirements at a managed server with RSB S2 /RSB S2 LP (3 HU)

–The framework vehicle of the RSB S2/ RSB S2 LP (3HU) must be 6.4.57.29 or higher.

–Access via Telnet must be activated via RSB S2/ RSB S2 LP (3HU).

ISince the Operations Manager does not know the management port value, the Remote Management Frontend works with the default value.

Since a connection is not automatically established when the Remote Management Frontend is started, you can correct any nonstandard value for the management port after the Remote Management Frontend has been started.

IMaximum number of parallel Telnet sessions for a connection via an RSB S2/ RSB S2 LP (3 HU) (with firmware version 7.0 or higher): maximum 4

ServerView Remote Management Frontend 43