Fujitsu V4.90 Power management bar, Working with the Remote Management Frontend, IPMI command

Working with the Remote Management Frontend User interfaces

Power management bar

The power management bar provides information on the power status of the managed server. You can update the display by clicking the Status button.

The Command drop-down list allows you to select and run the following IPMI commands for power management of the managed server.

IPMI command	Explanation
Power On	Switches the server on.
Power Off	Switches the server off.
Reset	Completely restarts the server (cold start), regardless of the status of the
	operating system.
Power Cycle	Powers the server down completely and then powers it up again after
	approximately 5 seconds.
Shutdown	Graceful shutdown and power off.

IYou can also use the Command drop-down list to start the power management of the managed server even if no console redirection session is active.

ServerView Remote Management Frontend 41