Fujitsu Siemens Computers C Series Using the power-management features, Installing the battery

Working with the notebook

Installing the battery

2

1

ÊPosition the battery at the edge of the casing (1).

ÊPush the battery into the battery slot until you feel it locking into place (2).

Using the power-management features

The notebook uses less power when the power management features are enabled. You will then be able to work longer when using the battery before having to recharge it.

If you are connected to a network or use the integrated modem, PC LAN card, or PC i modem card, we advise against enabling an energy saving mode. This could lead to an

interruption of your network connection.

When not using the notebook for long periods of time, first end the energy saving mode, then switch off the notebook. Never switch the notebook off with the Suspend/Resume button while the notebook is in one of the energy-saving modes.

If your notebook is in an energy-saving mode:

•Do not connect any external devices.

•Do not disconnect any external devices.

•Do not attempt to switch the notebook on if the built-in battery is flat.

•Do not add or remove RAM.

•Do not add or remove a PC card.

•Do not replace or remove the battery.

A26391-K136-Z120-2-7619 37