Working with the notebook

Standby mode

i

Depending on the settings in the BIOS Setup and operating system

- the computer switches into a standby mode

 

- the computer switches off when the key combination is held down for more than four

 

seconds.

 

 

 

 

ÊPress the Suspend/Resume button to switch the Standby mode on and off.

In the Standby/Suspend-to-DRAM mode the content of your main memory is saved by continuing to supply the main memory with power, while the processor, monitor, hard disk and other internal components are switched off. This mode is activated whenever you press the Suspend/Resume button. Saving is also triggered when you do not make an entry on your notebook for a certain time. When you resume work, your notebook returns to the place at which you discontinued working.

i

Do not use the Standby mode when you will not be using the notebook for a long time,

switch it off instead.

 

If you use an integrated LAN/Modem, a PC-LAN card or a PC modem card, we do not

 

recommend switching over to the Standby mode, as this may lead to an interruption in the

 

network connection.

 

When you press the Suspend/Resume button for more than 4 seconds, your notebook will

 

switch off.

38

A26391-K136-Z120-2-7619

Page 48
Image 48
Fujitsu Siemens Computers C Series manual Standby mode