To install the AC adapter in the cradle base,

1.Turn the cradle base upside down.

2.Detach one end of the Velcro strap and insert the AC adapter into the cavity in the bottom of the cradle base as shown in Figure 2-11.

3.Reattach the velcro strap to secure the AC adapter.

4.Attach the DC power cable from the AC adapter to the DC input connector on the cradle module.

5.Coil the DC supply cable of the AC adapter into “figure-eight” loops as shown in Figure 2-11 and tie the coiled cable using the tie wrap provided. Ensure that there is enough slack in the cable to allow the cradle module to pivot to the fully tilted position.

The cradle is now ready for installation at the work site.

Cutouts

 

Serial Port A

Floppy Disk Port

 

 

 

Cutouts

(for cable routing)

Keyboard

Serial Port B

Mouse Port

(for cable routing)

 

Port

 

 

 

DC Input

Power Port

Mouse

Port

Cutouts (for cable routing)

Velcro

Strap

Parallel Port

Video Port

Cutouts (for cable routing)

(Tie excess cable here.)

Mounting Holes

AC Adapter

AC Power Cable

Figure 2-11. High-Connectivity Cradle Bottom View

2-16

Assembling and Installing Connectivity Peripherals

Page 32
Image 32
Fujitsu Siemens Computers Point 500, Point 1600 manual High-Connectivity Cradle Bottom View