Fujitsu Siemens Computers Point 1600, Point 500 manual Wall-Mount Cradle Mounting Plate

Mounting Holes (To attach plate to wall.)

Mounting Holes (To attach plate to junction box.)

Mounting Holes (To attach plate to wall.)

Mounting Holes (To attach plate to junction box.)

Figure 2-12. Wall-Mount Cradle Mounting Plate

To install the wall-mount cradle,

1.Attach the mounting plate to the junction box. To do so, align the square hole in the mounting plate with the junction box and fasten the plate to the junction box. Use four screws with star-washers (not provided) to fasten the plate to the junction box. (The star-washers are required to break through the paint on the mounting plate and ensure that the plate is grounded to the electrical junction box.)

2.Attach the mounting plate to the wall. The bottom two round holes should be used so that the wall-mount cradle cannot be lifted up once installed. At least two of the four slotted holes should also be used and properly fastened to the wall according to local building codes.

3.Unplug the AC power cable from the AC adapter.

Installing the Wall-Mount Cradle 2-21