Fujitsu Siemens Computers Point 1600, Point 500 About This Guide

vii

About This Guide

This guide provides installation instructions for connectivity perip herals compatible with Point 1600 and

Point 510 pen tablet systems including the following:

• Portable port expander

• Port replicator*

• High-connectivity cradle*

•High-usage cradle*

• Wall-mount cradle*

• Charge-only cradle

* These connectivity peripherals are available in loc king and non-locking versions. Information

given in this manual applies to both v ersions.

Instructions given in this guide include pr ocedures for assembling and installing these peripherals. For

instructions on using these peripherals with your pen tablet, refer to the Connectivity Peripherals U ser’s

Guide: Point 510, Point 1600.

Note: All connectivity peripherals designe d for use with the Point 510 pen tablet are also compatible wit h the

Point 1600 pen tablet.

Organization 0

This guide is organized as follows:

• Chapter 1 Introducing Connectivity Peripherals

This chapter provides an introduction to the connectivity peripherals and lists the components needed

to assemble each conne ctivity peripheral.

• Chapter 2 Assembling and Installing Connectivity Peripherals

This chapter gives detailed instructions on assembling each connectivit y peripheral and instructions

for installation a t the work site.

Contents

Main Page Page Page Agency Compliance FCC Notice Canadian DOC Compliance Page Tabl e of Contents Page About This Guide Organization 0 Page Chapter 1 Introduction to Connectivity Peripherals Table 1-1. Connectivity Peripheral Model Numbers Page Cradle Module 1 The Portable Port Expander 1 Port Replicator 1 High-Usage C radle 1 High-Connectivity Cradle 1 Wall-Mount Cradle 1 Charge-Only Cradle 1 Chapter 2 Assembling and Installing Connectivity Peripherals Portable Port Expander 2 Figure 2-1. Portable Port Expander Latch Removing the Latch and Spacer (For In stallation in Cradle Module Onl y) 2 Latch Detail: Figure 2-2. Bottom View, Portable Port Expander Peripheral connectors on the portable port expander are described in Table 2-1. Table 2-1. Portable Port Expander Connectors Assemblin g th e Port Replicator 2 Figure 2-3. Installing the Portable Port Exp an der Attaching the Feet 2 Attaching the Wire Catch 2 Figure 2-4. Port Replicator (Back View) Figure 2-5. Bottom View, Port Replicator Connectors on the port replicator are described in Table 2-2. Table 2-2. Port Replicator Connectors Using the Folding Desk Stand 2 Figure 2-6. Folding Desk Stand Assemblin g th e H i gh - U s age C radle 2 Figure 2-7. High-Usage Cradle Assembly Figure 2-8. High-Usage Cradle Bottom View Table 2-3. High-Usage Cradle Connectors Installing the High-Usage Cradle 2 Figure 2-9. Fastening Cradle Module to Desktop Assembling the High-Connectivity Cradle 2 Figure 2-10. High-Connectivity Cradle Assembly Assembling the High-Connectivity Cradle 2-15 Figure 2-11. High-Connectivity Cradle Bottom View Installing the High-Connectivity Cradle 2 Table 2-4. High-Connectivity Cradle Connectors Installing the Wall-Mount Cradle 2 Required Tools and Hardware 2 Page Figure 2-12. Wall-Mount Cradle Mounting Plate Figure 2-13. Coiling DC Suppl y Cable Figure 2-14. Installing an FMWKB3 Keyboard Figure 2-15. Wall-Mount Cradle Exploded View Figure 2-16. Attaching Keyboard Tray Assembly to Mounting Plate (Right Side) Page Page Figure 2-21. Checking Cradle Module Alignment Testing the Wall-Mount Cradle After Installation 2 Figure 2-22. Wall-Mount Cradle Closed Position Installing the Wall-Mount Cradle Connectors on the wall-mount cradle are described in Table 2 -5. Table 2-5. Wall-Mount Cradle Connectors Installing the Charge-Only Cradle 2 Figure 2-23. Charge-Only Cradle Confirming External Power Is Supplied 2 Figure 2-24. Status Lights on the Pen Tablet MIC Page Index C H K M