Manuals / Brands / Computer Equipment / Network Card / Fujitsu Siemens Computers / Computer Equipment / Network Card

Fujitsu Siemens Computers Point 1600, Point 500 Installing the Charge-Only Cradle 2

1 52

Download 52 pages, 499.61 Kb

2-30

Assembling and Installing Connectivity Peripherals

Installing the Charge-Only Cradle 2

To install the charge-only cradle,

1. Place the cradle in the location where it will be used.

2. Plug the DC power cable from AC adapter into the DC input connector located on the bottom of the

charge-only cradle.

3. Plug the AC power cable into the AC adapter and into an AC outlet.

The charge-only cradle is ready to be used.

Figure 2-23. Charge-Only Cradle

DC Power

Input Connector

Contents

Main Page Page Page Agency Compliance FCC Notice Canadian DOC Compliance Page Tabl e of Contents Page About This Guide Organization 0 Page Chapter 1 Introduction to Connectivity Peripherals Table 1-1. Connectivity Peripheral Model Numbers Page Cradle Module 1 The Portable Port Expander 1 Port Replicator 1 High-Usage C radle 1 High-Connectivity Cradle 1 Wall-Mount Cradle 1 Charge-Only Cradle 1 Chapter 2 Assembling and Installing Connectivity Peripherals Portable Port Expander 2 Figure 2-1. Portable Port Expander Latch Removing the Latch and Spacer (For In stallation in Cradle Module Onl y) 2 Latch Detail: Figure 2-2. Bottom View, Portable Port Expander Peripheral connectors on the portable port expander are described in Table 2-1. Table 2-1. Portable Port Expander Connectors Assemblin g th e Port Replicator 2 Figure 2-3. Installing the Portable Port Exp an der Attaching the Feet 2 Attaching the Wire Catch 2 Figure 2-4. Port Replicator (Back View) Figure 2-5. Bottom View, Port Replicator Connectors on the port replicator are described in Table 2-2. Table 2-2. Port Replicator Connectors Using the Folding Desk Stand 2 Figure 2-6. Folding Desk Stand Assemblin g th e H i gh - U s age C radle 2 Figure 2-7. High-Usage Cradle Assembly Figure 2-8. High-Usage Cradle Bottom View Table 2-3. High-Usage Cradle Connectors Installing the High-Usage Cradle 2 Figure 2-9. Fastening Cradle Module to Desktop Assembling the High-Connectivity Cradle 2 Figure 2-10. High-Connectivity Cradle Assembly Assembling the High-Connectivity Cradle 2-15 Figure 2-11. High-Connectivity Cradle Bottom View Installing the High-Connectivity Cradle 2 Table 2-4. High-Connectivity Cradle Connectors Installing the Wall-Mount Cradle 2 Required Tools and Hardware 2 Page Figure 2-12. Wall-Mount Cradle Mounting Plate Figure 2-13. Coiling DC Suppl y Cable Figure 2-14. Installing an FMWKB3 Keyboard Figure 2-15. Wall-Mount Cradle Exploded View Figure 2-16. Attaching Keyboard Tray Assembly to Mounting Plate (Right Side) Page Page Figure 2-21. Checking Cradle Module Alignment Testing the Wall-Mount Cradle After Installation 2 Figure 2-22. Wall-Mount Cradle Closed Position Installing the Wall-Mount Cradle Connectors on the wall-mount cradle are described in Table 2 -5. Table 2-5. Wall-Mount Cradle Connectors Installing the Charge-Only Cradle 2 Figure 2-23. Charge-Only Cradle Confirming External Power Is Supplied 2 Figure 2-24. Status Lights on the Pen Tablet MIC Page Index C H K M