Manuals / Brands / Computer Equipment / Network Card / Fujitsu Siemens Computers / Computer Equipment / Network Card

Fujitsu Siemens Computers Point 1600, Point 500 Figure 2-8. High-Usage Cradle Bottom View

1 52

Download 52 pages, 499.61 Kb

2-10

Assembling and Installing Connectivity Peripherals

To install the AC adapter in t he cradle base,

1. Turn the cradle base upside down.

2. Detach one end of the Velcro strap and insert the AC adapter into the cavity in the bottom of the

cradle base as shown in Figure 2-8.

3. Reattach the velcro strap to secure the AC adapter.

4. Attach the DC power cable from the AC adapter to the DC input connector on the cradle module.

5. Coil the DC supply cable of the AC adapter into “figure-eight” loops as shown in Figure 2-8 and tie

the coiled cable using the twist tie provided with the AC adapter. Ensure that there is enough slack in

the cable to allow the cradle module to pivot to the fully tilted position.

The high-usage cradle is now ready for installation at the work site.

Figure 2-8. High-Usage Cradle Bottom View

Velcro

Strap

Keyboard

Mouse DC Input

Port

Port

AC Adapter

AC Power Cable

Cutouts (for cable routing)

Mounting Holes

(Tie excess cable here.)

Cutouts (for cable routing)Cutouts (for cable routing)

Contents

Main Page Page Page Agency Compliance FCC Notice Canadian DOC Compliance Page Tabl e of Contents Page About This Guide Organization 0 Page Chapter 1 Introduction to Connectivity Peripherals Table 1-1. Connectivity Peripheral Model Numbers Page Cradle Module 1 The Portable Port Expander 1 Port Replicator 1 High-Usage C radle 1 High-Connectivity Cradle 1 Wall-Mount Cradle 1 Charge-Only Cradle 1 Chapter 2 Assembling and Installing Connectivity Peripherals Portable Port Expander 2 Figure 2-1. Portable Port Expander Latch Removing the Latch and Spacer (For In stallation in Cradle Module Onl y) 2 Latch Detail: Figure 2-2. Bottom View, Portable Port Expander Peripheral connectors on the portable port expander are described in Table 2-1. Table 2-1. Portable Port Expander Connectors Assemblin g th e Port Replicator 2 Figure 2-3. Installing the Portable Port Exp an der Attaching the Feet 2 Attaching the Wire Catch 2 Figure 2-4. Port Replicator (Back View) Figure 2-5. Bottom View, Port Replicator Connectors on the port replicator are described in Table 2-2. Table 2-2. Port Replicator Connectors Using the Folding Desk Stand 2 Figure 2-6. Folding Desk Stand Assemblin g th e H i gh - U s age C radle 2 Figure 2-7. High-Usage Cradle Assembly Figure 2-8. High-Usage Cradle Bottom View Table 2-3. High-Usage Cradle Connectors Installing the High-Usage Cradle 2 Figure 2-9. Fastening Cradle Module to Desktop Assembling the High-Connectivity Cradle 2 Figure 2-10. High-Connectivity Cradle Assembly Assembling the High-Connectivity Cradle 2-15 Figure 2-11. High-Connectivity Cradle Bottom View Installing the High-Connectivity Cradle 2 Table 2-4. High-Connectivity Cradle Connectors Installing the Wall-Mount Cradle 2 Required Tools and Hardware 2 Page Figure 2-12. Wall-Mount Cradle Mounting Plate Figure 2-13. Coiling DC Suppl y Cable Figure 2-14. Installing an FMWKB3 Keyboard Figure 2-15. Wall-Mount Cradle Exploded View Figure 2-16. Attaching Keyboard Tray Assembly to Mounting Plate (Right Side) Page Page Figure 2-21. Checking Cradle Module Alignment Testing the Wall-Mount Cradle After Installation 2 Figure 2-22. Wall-Mount Cradle Closed Position Installing the Wall-Mount Cradle Connectors on the wall-mount cradle are described in Table 2 -5. Table 2-5. Wall-Mount Cradle Connectors Installing the Charge-Only Cradle 2 Figure 2-23. Charge-Only Cradle Confirming External Power Is Supplied 2 Figure 2-24. Status Lights on the Pen Tablet MIC Page Index C H K M