Fujitsu Siemens Computers Point 500, Point 1600 manual Port Replicator, High-Usage Cradle

Port Replicator

The port replicator provides the combined features of the portable port expander, plus additional keyboard and power connectors. The port replicator is assembled by installing the portable port expander in the cradle module. For assembly instructions, see “Assembling the Port Replicator” in Chapter 2 of this manual.

Components Assembled Package

+ =

Cradle Module

Portable Port	Port
Expander	Replicator
(Note: Latch and spacer must
be removed before assembly.)

The port replicator is best suited for use on a desk top and is designed for use with the FMWDS3 folding desk stand. The port replicator replicates ports that are built into the pen tablet and adds connectivity that is not built in. Typically, the port replicator is connected to peripheral computer equipment and the pen tablet can then be inserted in the port replicator when the peripheral equipment is needed.

High-Usage Cradle

The high-usage cradle is designed for applications where the pen tablet is inserted into and removed from the cradle frequently. The high-usage cradle is equipped with special “high-usage” connector pins that are designed to withstand a high number of pen tablet insertion and removal operations. This cradle is best suited for desk-top or counter-top installations where the cradle remains stationary. Locking versions are equipped with a tubular lock which allows you to lock the pen tablet into the cradle. The high-usage cradle assembly includes the cradle module and the cradle base. An AC adapter must also be installed in the cradle base if the cradle is to provide power to the system. (An AC adapter is shipped with each pen tablet and can also be purchased separately.)

Components Assembled Package

	+	=
Cradle	Cradle	High-Usage
Module	Base	Cradle

1-4 Introduction to Connectivity Peripherals