Furuno 1824C manual Port services and sample port list, Select Service

3. PLOTTER OPERATION

SELECT SERVICE

FUEL

WATER

OTHER UTILITIES

REPAIR

GENERAL

FIRST AID

OTHER INFO

TM

Port services (NavChart )

SELECT PORTS

	POSITION
ACCIAROLI
	xx xx.xxx'N
ACQUAMORTA	xxx xx.xxx'W
AGNONE S. NICOLA	BRG. & RNG.
	xxxT x.xxxnm
AGROPOLI	GENERAL SERVICE
AMALFI	XXXXXXX
	XXXXXXX
BAIA	XXXXXXX
CAPRI
CASA MICCIOLA-ISCHIA

Port list (NavChart TM, Italy)

Port services and sample port list

6.(NavChart) If you selected PORT (Navionics only) at step 4, use the Trackball to select a port, then press the GOTO soft key. Make a route using the soft keys, then push the ENTER knob. (If you want to go directly to the port, simply press the ADD QP soft key followed by the ENTER knob.)

(C-MAP) If you selected PORT at step 4, use the Trackball to select a port, and then press the ENTER knob or ENTER soft key. Press the CANCEL soft key several times to close windows, and then do the follows.

a)Operate the Trackball to select the sailboat icon at the center of the screen.

b)Press the GO TO soft key.

c)Press QUICK ROUTE soft key.

d)Press the SELECT WPT soft key.

e)Press the ENTER knob.

If you selected SERVICE at step 4, select service mark desired with the Trackball and then push the ENTER soft key or the ENTER knob. Then, the display shows the locations of those services nearest you. Use the Trackball to place the “hand cursor” on the port service icon desired, then press the ENTER soft key. Make a route using the soft keys, then push the ENTER knob. (If you want to go directly to location selected, simply press the ADD QP soft key followed by pushing the ENTER knob.) For C-MAP, press the CANCEL soft key several times to show the plotter display with the port having the selected service at the center of the display. Select the port with cursor, and then set it as destination referring to step a) through e) shown above.

3-42