Furuno 1824C manual Restarting navigation, Example of when to restart navigation, Log display

3. PLOTTER OPERATION

Restarting navigation

When you steer to avoid an obstacle or the vessel drifts, you may go off your intended course, as in Line 1 in the figure below. Also, if you don’t need to return to the original course, you can go directly to the next waypoint, as in Line 2 in the figure below. In these cases, use the restart navigation function to restart navigation.

Line 2

Line 1

Obstacle

Original course

Example of when to restart navigation

1.Press the MENU key to open the menu.

2.Press the WAYPOINTS/ROUTES soft key.

3.Press the LOG soft key.

TO Waypoint (WPT name in reverse video)

Passed waypoint (gray characters)

Estimated Time of Arrival at destination

Replaces triangle when selecting a route leg.

ETA 23:59 30. APR

	01		48°18.290'N	LEG
		007WPT	123°14.286'W
				90.0°
		02	48°17.341'N	2.86nm
▲		02
			123°10.232'W
		005WPT
				322.6°
				3.08nm
	03		48°20.261'N
			123°11.658'W
		003WPT
				75.2°
	04		48°19.862'N	4.99nm
			123°04.190'W
		006WPT
				152.5°
				19.87nm

LOG

RE-

START

STOP

RVRSE

SPEED

COORD

TYPE

Replaced by

"FOLLOW LEG" when selecting a route leg.

Log display

4.Use the Trackball to select a waypoint or a route leg. When a route leg is selected the single arrow cursor is replaced by double arrows.

5.Press the RESTART soft key or FOLLOW LEG soft key in case of route leg. RESTART: Line2 in the figure above

FOLLOW LEG: Line 1 in the figure above

6.Press the MENU key to close the menu.

3-44