Furuno 1824C manual Radar Display, Transmitting, Stand-by, Radar display

2. RADAR OPERATION

This chapter covers radar operation, including the ARP (Auto Plotter) function. ARP requires a Model 18x4C/19x4C series network radar equipped with the ARP circuit board.

2.1Radar Display

North marker				Guard zone 2
(Head-up, Course-up mode)
				Cursor					Heading
Range/	Pulselength
						Heading line			M: Magnetic
range ring
									T: True
interval
Presentation		3nm					°		TRAIL 30m	Trail time
	12/LP					319. 9		M
mode	H-UP								02m30s	Trail elapsed time
Alarm icon									G1 IN	Guard zone 1
EBL1									G2 OUT	Guard zone 2
Battery icon									ES H	Echo stretch
	S I								EAV L	Echo averaging
Simulation
mode		M							IR L	Interference rejector
Guard zone 1										VRM2
Range ring
										EBL2
VRM1										Own ship vector
										(ARP-equipped model,
										true vector mode)
Zoom area										Zoom
										window
EBL1 bearing	EBL1		EBL2		°				+ 359.9 ˚R	Cursor range
VRM1 range	VRM1 27.0°R		VRM2	327.1		R
		5.666nm		8.212nm					11.70nm	and bearing
			EBL2 bearing, VRM2 range							(Cursor position may
										also be shown, in
										L/L or Loran C TD.)

Radar display

2.2Transmitting, Stand-by

1.Confirm that the network radar is plugged in.

2.Press the DISP key to select a radar display.

3.Press the POWER/BRILL key momentarily.

4.Press the RADAR STBY soft key to highlight TX on its label.

5.Press the RETURN soft key.

When the radar picture is not required, but you want keep it in a state of readiness, press the RADAR TX soft key to highlight STBY on its label.

2-1