Furuno 1824C manual Plotter Function

4.6	Output Data
	Alarm signal	12 VDC, 100 mA or less
	NMEA 0183 Ver1.5	GGA, GLL, RMA, RMC, GTD, VTG, ZDA (GPS data required)
		RMB, WPL, BWC or BWR, APB, AAM, BOD, XTE, VHW, MTW,
		DPT or DBT, DBS (ETR required),
		TLL (L/L, Heading data required), TTM (ARPA required)
5	PLOTTER FUNCTION
5.1	Projection	Mercator
5.2	Usable Area	85 latitude or below
5.3	Effective Area	211.2 x 158.4 mm
5.4	Display pixels	640 x 480 dots
5.5	Position Indication	Latitude/longitude, Loran C LOP or DECCA LOP

5.6Effective Projection Area 0.125 nm to 1,024 nm (at equatorial area)

5.7	Track Display	Plot interval: by time (1 sec. to 99 min. 59 sec.) or
		by distance (0 to 99.9 nm)
5.8	Colors	Red, yellow, green purple, light-blue, blue, white
5.9	Memory Capacity	Track/mark: 8000 points, Waypoint: 999 points
5.10	Storage Capacity	Simple route: 200 routes with 35 waypoints each
5.11	MOB	1 point
5.12	Quick Routes	1 course with 35 waypoints max.
5.13	Electronic Chart	SD card - FURUNO or NAVIONICS chart card available
		C-MAP chart card also available
5.14	Alarms	Arrival and Anchor watch, Cross track error and proximity
		alarms, Ship’s speed in and out alarms, Water temperature,
		Trip alarm, Fish alarm, Bottom alarm (ETR required), Grounding
		alarm

6 POWER SUPPLY

6.1Rated Voltage/Current

M1824C	12-24 VDC: 7.3-3.6 A
M1834C	12-24 VDC: 7.3-3.5 A
M1934C	12-24 VDC: 8.9-4.3 A
M1944C	12-24 VDC: 9.3-4.4 A
M1954C (24rpm)	12-24 VDC: 10.4-5.1 A
M1954C (48rpm)	12-24 VDC: 12.2-5.9 A
M1964C (24 rpm)	12-24 VDC: 12.3-6.0 A
M1964C (48 rpm)	12-24 VDC: 14.0-6.6 A
6.2 Rectifier (option)	100/110/115/220/230 VAC, 1 phase, 50/60 Hz

SP - 4