Furuno 1824C manual Navigator Setup, Navigation data source

7. CUSTOMIZING YOUR UNIT

5.Rotate the ENTER knob to select a main screen, then press the ENTER knob. For example, select the radar display. Your choice is then shaded to show that is has been selected.

HOT PAGE 1

RADAR PLOTTER SOUNDER

COMPASS HIGHWAY EXT VIDEO

Sub screen

Hot page setup menu, SPLIT X 3 screen, sub screen selection

6.Rotate the ENTER knob to select the screen to show at the top right 1/4 screen, then press the ENTER knob or the ENTER soft key.

7.Rotate the ENTER knob to select the screen to show at the bottom right 1/4 screen, then press ENTER knob or the ENTER soft key.

Note: The SELECT WINDOW soft key functions to select the window to process.

8.Press the MENU key to close the menu.

7.7Navigator Setup

This section provides the information necessary for selecting the type of navigator connected to your plotter.

7.7.1Navigation data source

The NAV SETUP menu mainly selects the source of nav data. For GPS receiver other than the GP-310B/320B, speed averaging and local time

offset (to use local time) are also available. Press the MENU key followed by the SYSTEM

CONFIGURATION, NAV OPTION and NAV SOURCE SETTINGS soft keys to display this menu.

POSITION SOURCE	ALL
SPEED SOURCE	ETR
TEMPERATURE SOURCE	ETR
DE`PTH SOURCE	ETR
STW CALIBRATION	0%
TEMP CALIBRATION	+0.0°F
DEPTH CALIBRATION	+0.0ft
WIND AVERAGING	5 minutes
WIND DIRECTION OFFSET	P0.0°
WIND SPEED CALIBRATION	00°F

NAV

SETUP

EDIT

RETURN

7-23