Furuno 1824C Memory Card Operations, Deleting all data other than chart data from memory cards

6. DATA TRANSFER

6. DATA TRANSFER

This chapter provides information for saving and replaying data to and from memory cards, uploading and downloading data, loading waypoint data from Yeoman, and outputting data through the network.

6.1Memory Card Operations

The memory cards store these data: marks, lines, waypoints, routes, track, position, water temperature and setting data (plotter only). The following memory cards may be used:

Kingstone: SD-M64B1 (64 MB), SD-M128B1 (128 MB)

Viking: 32SD-M32B1 (32 MB), 64SD-M64B1 (64 MB)

EP Memory: 32 MB, 64 MB

SANDISK: 64SDSDB-64-J60 (64 MB), 128SDSDB-128-J60 (128 MB)

Panasonic: 64 RP-SD064BL1A (64 MB), 128RP-SD128BL1A (128 MB)

Toshiba: 64 SD-NAD064MT (64 MB), 128 SD-NA128MT (128 MB)

6.1.1Deleting all data (other than chart data) from memory cards

Follow the procedure below to delete all data from a memory card.

1.Insert a blank memory card into the card slot.

2.Press the MENU key followed by the SYSTEM CONFIGURATION, DATA TRANSFER, UPLOAD/DOWNLOAD DATA and SAVE DATA TO MEMORY CARD soft keys to show the SAVE DATA menu.

▲

TRACKS

MARKS & LINES

WAYPOINTS & ROUTES

SETTING DATA*

OFF

OFF

OFF

OFF

SAVE DATA

EDIT

SAVE

DELETE

RETURN

* = Plotter data only

Save data menu

3.Press the DELETE soft key. You are asked if you are ready to delete the memory card.

4.Push the ENTER knob to delete (or press the CLEAR key to escape). Do not remove the card while its contents are being deleted. When the deleting is completed,

““COMPLETED DELETING USER DATA. PUSH ENTER KNOB TO CONTINUE.” appears.

5.Push the ENTER knob to continue.

6-1