Changing mark attributes, Selecting line type | Furuno 1824C

3. PLOTTER OPERATION

3.7.2Changing mark attributes

You can select the shape, size and color for marks on the MARKS & LINES menu.

1.Press the MENU key to show the menu.

2.Press the CHART SETUP, TRACKS & MARKS CONTROL and MARK SETUP soft keys to show the MARKS & LINES menu.

MARKS/LINES COLOR YELLOW

MARKS SHAPE	.
LINES STYLE	.
MARKS SIZE	LARGE

SHIP'S TRACK STATUS

TRACKING

TRACK: 1234/2000

MARK : 9/6000

MARKS & LINES

EDIT

RETURN

Marks & lines menu

3.Select MARKS/LINES COLOR, then press the EDIT soft key.

4.Use the Trackball to choose color desired (default setting: yellow).

5.Press the ENTER soft key.

6.Select MARKS SHAPE, then press the EDIT soft key.

MARKS SHAPE

▲

✕

▼

Marks shape window

7.Use the Trackball to select mark shape desired, then press the ENTER soft key.

8.Select MARKS SIZE, then press the EDIT soft key.

9.Use the Trackball to select LARGE (default setting) or SMALL as appropriate.

10.Press the ENTER soft key.

11.Press the MENU key twice to close the menu.

3.7.3Selecting line type

You may inscribe lines to denote good fishing spots, areas of special interest, etc. You can even construct simple charts.

1.Press the MENU key followed by the CHART SETUP, TRACKS & MARKS CONTROL and MARK SETUP soft keys to show the MARKS & LINES menu.

3-24

Image 89

Furuno 1824C manual Changing mark attributes, Selecting line type, Marks & lines menu, Marks shape window

Contents

Page Safety Instructions Table of Contents ARP IiiARP, TTM Data Transfer SP-1 AP-1IN-1 Declaration of Conformity Model Output Range Radar antenna size, type Rotation speed Features Vii NavNet system Model 1824C/1834C/1934C/1944C/1954C/1964C ViiiNavNet system Model 1824C/1834C/1934C/1944C/1954C/1964C Single-unit NavNet system GD-1920C Single-unit NavNet system GD-1920C Two-unit NavNet system Two-unit NavNet systemThree-or-more-unit NavNet system Max display units Three-or-more-unit NavNet system Display unit controls Operating ControlsDisplay unit controls Display unit Soft keysRadar and plotter displays Operational Overview Key Function Remote controllerKey Inserting a Chart Card Turning the Unit On/Off Display Brilliance, Panel Brilliance, Hue Brilliance adjustment soft keysDisplay brilliance, panel brilliance Display brilliance and panel brilliance windows Night Day Twilight 2 HueHue window Display modes Selecting a DisplayDisplay screens Screen type and available display screen Radar combination screen selection window Selecting a displayDisplay screen selection window To adjust Sounder Plotter Switching control in combination and overlay screens Radar source and sounder source windows Selecting image sourceSelect source menu Cursor, cursor data Trackball, Cursor MOB mark messages Entering the MOB Mark, Setting MOB as DestinationMOB concept Showing, hiding data boxes with soft key Data BoxesRearranging data boxes Temporarily erasing a data box Function Keys Function Default Setting, Key LabelExecuting a function Function keys Radar Simulation setup menuSimulation Display Sounder Plotter This page intentionally left blank Radar display Radar DisplayTransmitting, Stand-by Adjusting the Gain TuningTuning window Gain sensitivity window Effect of A/C SEA Reducing Sea ClutterHow the A/C SEA works Adjusting the A/C Rain Adjusting the A/C SEASEA setting window Rain setting window Pulselength Range ScaleRange scales nm, sm Range scales km Selecting a presentation mode Presentation ModeSignal process soft keys Function Indicator on display Soft key label Head-up Description of presentation modesCourse-up North-up Measuring the Range How to measure range to a target with the cursorMeasuring range by range rings Measuring range by cursor Various VRM operations How to measure range with the VRMMeasuring range by VRM Measuring bearing by cursor Measuring the BearingMeasuring bearing by EBL Various EBL operations Reducing Noise Interference Erasing the Heading Line, North MarkerRejecting Radar Interference Radar interference Zooming radar targets Zoom Target no. selection window Zooming ARP, TTM targetsZoom Shifting the Picture Setting automatic shift maximum speedManual shift Automatic shift Predicting collision course with the offset EBL Using the Offset EBLPredicting collision course Measuring range and bearing between two targets Measuring range & bearing between two targets Trail time Echo TrailsSample echo trails Trail soft keys Trail gradation Starting echo trailsTrail color Multitone and monotone trails Echo Stretch Echo trail modeTrail mode window Effect of echo averaging Echo Averaging Target soft keys Outputting TLL Data How to set a guard alarm zone Guard AlarmSetting a guard alarm zone Cancelling the guard alarm When the alarm is violated…Watchman How watchman works Suppressing Second-trace Echoes Setting watchman stand-by intervalWatchman time window Second-trace echoes Waypoint marker Waypoint Marker 26 ARP, TTM Operation Usage precautions for ARP Activating/deactivating ARP, TTM ARP setup menuAcquiring and tracking targets ARP ARP Target Info window Automatic acquisition area window ARP plot symbolsAutomatic acquisition Terminating tracking of ARP targets Displaying target number ARP, TTMTerminating tracking of selected targets Terminating tracking of all targets Vector reference, vector time Setting vector attributes ARPWhat is a vector? 26.7 ARP, TTM target data Displaying past position ARPPast position displays History interval window ARP target data 26.8 CPA/TCPA alarm ARP Lost target mark Lost target alarm ARPCanceling a lost target False echoes Interpreting the Radar DisplayMultiple echoes Sidelobe echoes Shadow sector Appearance of Sart signal on the radar displaySart Search and Rescue Transponder Racon Radar Beacon General procedure for detecting Sart responseAppearance of racon signal on the radar display Full-screen plotter display Plotter DisplaysFull-screen plotter display Nav data window Plotter Operation Contents of nav data window Compass display Nav graphic displayCompass display XTE range setting window Reading the XTE cross-track error monitor Anemometer display Anemometer display Highway display Highway display Nav data displays Nav data display Perspective C-map only Auto course-upNorth-up Course-up Chart Cards Chart ScaleChart card overview Shifting the Display When a chart cannot be displayed Indices and chart enlargementSample chart Japan, showing indices Port service icons Navionics chartsPlotter display, showing port service display Data for aids to navigation Current data display Current or tide dataObject information Object information window Find window Find function Cursor and data display MAP chartsObjects window Example of caution area window Object windows Icon dataLighthouse icon Tide window Sample lighthouse dataTide information Date window Map, port service display Displaying track Working with TrackOwn ship track Track control menu Own ship’s track Stopping, restarting plotting of own ship trackChanging track color Own ship track color window Track plotting method and interval for own ship trackTrack plotting method Interval window Track plotting interval Changing own ship track/mark distribution settingInterval windows Track memory window Erasing own ship track by area Erasing trackErase menu Erasing own ship track by color Entering a mark, line Marks, LinesErase track by color window Erasing all own ship track Selecting line type Changing mark attributesMarks & lines menu Marks shape window Lines style window Erasing marks, linesErasing an individual mark Erasing an individual line Entering waypoints WaypointsErasing all marks, lines Entering a waypoint at own ship position Waypoint mark color selection window Waypoint windowWaypoint mark shape selection window Entering a waypoint by range and bearing P T Entering a waypoint from the waypoint list Editing waypoint dataAlphanumeric and local waypoint lists Editing waypoint data from the waypoint list Editing a waypoint from the plotter display Erasing waypointsPlotter display Erasing a waypoint directly from the plotter display Changing waypoint mark size Navionics Gold Chart details menuErasing a waypoint from the menu Erasing a waypoint from the waypoint list Alphanumeric list Searching waypoints Creating routes RoutesEntering a route with existing waypoints Route menu Creating voyage-based routes New route entry screenEntering a route with the cursor Displays for entry of time, distance interval Save route menuSave route window Connect route window Connecting routes Inserting a waypoint from the route list Inserting waypointsEdit route menu Waypoint list for editing a Route local list Inserting a waypoint from the plotter display Removing waypoints from a routeRemoving a waypoint from the route list Removing a waypoint from the plotter display Erasing routes NavigationNavigating to a quick point Selecting quick point entry method Navigating to a single quick point Navigating to waypointsNavigating to multiple quick points Selecting a waypoint from the plotter display QP window Navigating to ports, port services NavChartTM onlySelecting an external waypoint Select Service Port services and sample port list Selecting the route to follow Following a routePlotter display, route selected as destination Navigating waypoints in reverse order Log display Example of when to restart navigationRestarting navigation Switching waypoints Setting speed for ETA calculationAutomatic waypoint switching methods Select speed for ETA window On the plotter display Canceling route navigationThrough the menu Audio alarm on/off AlarmsPlotter alarm menu Audio alarm window Arrival alarm window Arrival alarmHow the arrival alarm works Anchor watch alarm window Anchor watch alarmHow the anchor watch alarm works Speed alarm XTE Cross-Track Error alarmHow the XTE alarm works XTE alarm window Trip alarm Proximity alarmProximity alarm window Trip alarm window Grounding alarm window Grounding alarm C-MAP specification Plotter alarm menu, Alarm information Message Meaning Alarm messagesPlotter alarm messages and their meanings General setup menu, Resetting Trip Distance This page intentionally left blank Selecting a sounder display Display mode windowSounder Displays Single-frequency display Description of sounder displaysIndications on the single frequency display Dual-frequency display Marker-zoom display plus normal sounder display Sounding area and transmission frequencyMarker-zoom display Bottom-zoom display plus normal sounder display Bottom-zoom displayBottom-lock display Bottom-lock display plus normal sounder display Bottom discrimination display Bottom discrimination displayScope display display only Scope display Selecting screen split method in combination displays Automatic Sounder OperationHow the automatic sounder works Types of automatic sounder modes Selecting the manual mode How to enable automatic sounder operationManual Sounder Operation Selecting display range Shifting the range Adjusting the gainExamples of proper and improper gain Gain window Measuring Depth, Time How to measure depth and timeReducing Interference Types of interference Noise limiter window Reducing Low Level NoiseAppearance of clutter Clutter window Appearance of weak echoes Signal level windowErasing Weak Echoes White Marker Color bar 16 color when white marker function is activePicture Advance Speed Advancement independent of ship’s speed Picture advance window Advancement synchronized with ship’s speed Hue No Echo Color Background Color Display ColorsHue no. and background and echo colors Alarm audio window Sounder alarm menu Fish alarm Bottom alarmBottom alarm window Fish alarm window Water temperature alarm Fish alarm B/LFish alarm B/L window Water temperature alarm window Sounder alarm messages and their meanings When an alarm setting is violatedDepth Alarm Fish Alarm Saving Sounder Picture to an SD Card Water Temperature GraphChanging Pulse Repetition Rate Zero line Interpreting the Sounder DisplayBottom echo Zero line Surface noise/Aeration Fish school echoesFish school echoes Surface noise/aeration This page intentionally left blank AIS Option menu Turning AIS Feature On/Off AIS Operation AIS Display Mode windowVector mode Setting Number of AIS Targets to Display AIS SymbolsAIS symbols Symbol Description AIS target data display Activating TargetsDisplaying Target Data Lost Target Setting CPA and TcpaLost target Confirming a lost target Tcpa window Proximity AlarmCPA window AIS vector time window Showing, Hiding AIS Target TracksChoosing Vector Time AIS past position displays Displaying Past Positions of AIS Targets Memory Card Operations Deleting all data other than chart data from memory cardsSave data menu Data Transfer Memory card messages Saving data to a memory cardMemory card messages Message Reason Remedy Load data menu Playing back data from a memory card Uploading, Downloading Data Setting communication software on the PCUploading or downloading data Upload and download menus Waypoint data format Baud rate windowWaypoint data format Characters available for comment End of sentence Route data menuRoute comment data format Mark data format Loading Waypoint Data from YeomanMark data format Receive data menu Receiving Data Via Network EquipmentHost name window Marks & lines window Select sentence menu Outputting Data Through the Network This page intentionally left blank General setup menu General Setup Contents of general setup menu Contents of general setup menu con’t from previous Radar display setup Radar SetupRadar display setup menu AIS Option Con’t on next Contents of radar display setup menu Contents of radar display setup menu con’t from previous Model Maximum Range Radar range setupRadar range setup menu Function Key Default Function Function key setupRadar function key menu Radar function key options Menu Item Function Function Key Label Radar function keys Navigation options Plotter SetupPlotter setup menu Contents of plotter setup menu TRK EML RUL ADD ALP Plotter function key menu Plotter function keys Plotter display, chart offset selected Chart SetupChart offset Navionics Gold chart attributes Displaying the Chart Configuration menu MAP chart attributesChart configuration menu C-MAP Contour Line Soft key Object Content Settings Description Chart Configuration menu descriptionChart Configuration menu description Object Content Setting Description Chart Configuration menu description con’t from previous Normal or U.ZOOM or O.ZOOM Depth Config menu description Depth Config soft keyDepth Config menu Setting Setting Range Default Setting Data Boxes SetupData box menu Show from Data Boxes Setup Hot page setup menu Hot Page Setup Navigation data source Navigator SetupHot page setup menu, Split X 3 screen, sub screen selection Contents of nav setup menu GPS setup menu Contents of GPS setup menu GPS receiver setup Set equipped with GP-310B/320B Contents of GPS setup menu con’t on previous GPS Status TD setup menu TD display setupContents of Waas Setup menu Loran GRI & station pair window Displaying Loran C TDsLoran C GRI & station pair window Displaying Decca TDs Nav data setup screen Nav Data Display Setup System setup Sounder SetupNav data setup window Sounder system setup menu TVG Sounder system setup menu descriptionHF,LF SM1-SM4, OFF Sounder system setup menu description con’t from previous Sensor setup menu Sensor setupSensor setup menu settings Setting range for default Default Setting Default basic ranges Sounder range setup menuSounding range, zoom range, bottom lock range Zoom range and bottom-lock ranges TLL CLT SLV Sounder function key menuSounder function key options Sounder function keys NAV Graphic menu Nav Graphic Display SetupGraphic meter window Depth graph up-date window Maintenance program Preventive MaintenanceCheck point Remedy LCD Replacement of Fuse Replacement of BatteriesBattery on circuit board Batteries in remote controller Replacing the Magnetron Trackball MaintenanceReplacing the Synchro Belt 1824C only Radar model and magnetron used General troubleshooting Simple TroubleshootingRadar troubleshooting General Plotter Plotter troubleshooting Sounder Sounder troubleshooting Memory I/O Test menu DiagnosticsMemory I/O test Display unit test results Display unit testGPS sensor test Requires GPS Receiver GP-310B/320B GPS receiver test results ARP test results Network sounder test results Test pattern sequence Test pattern Screen for testing keyboard, remote controller Keyboard, remote controller test GPS status display GPS Status Display Windows for clearing memory Clearing MemoriesMemory clear menu Error messages Error MessagesError Message Meaning Remedy General Heading Data Missing AP-1 Menu Overview Appendix AP-2 AP-3 Setup AP-4 NAV Graphic Display Setup Plotter AP-5 AP-6 Depth Config soft key AP-7 Zoom Marker ON, OFF HUE 1-9 AP-8 Radar Alarms Alarm keyPlotter Alarms Sounder Alarms AP-10 Geodetic Chart List Icon Meaning IconsAP-11 AP-12 Model 18x4C/19x4C Series Specifications of Marine Radar Transceiver Module Display Unit Plotter Function Environmental Condition Specifications of Video Plotter GD-1920C IN-1 Index Index IN-2 Messages IN-3 IN-4 TD setupPage Page