Furuno 1824C manual Data Boxes Setup

7. CUSTOMIZING YOUR UNIT

7.5Data Boxes Setup

You may select the data to show in the data boxes for the plotter, radar and sounder displays. Six boxes may be displayed in case of small size data box and two for large size data box.

1.Display the radar, plotter or sounder display, whichever you want to set.

2.Press the MENU key to open the main menu.

3.Press one of the following sets of soft keys depending on the display selected at step 1.

Plotter mode: PLOTTER SETUP, D. BOX

Radar mode: RADAR DISPLAY SETUP, D. BOX

Sounder mode: SOUNDER MENU, D. BOX

▲

DATA BOX SIZE POSITION WAYPOINT COG

SOG

STW BEARING RANGE TIME TO GO ETA TEMPERATURE DEPTH

TRIP LOG DATE TIME WIND HEADING

SMALL ON OFF ON ON OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF

DATA

BOX

EDIT

RETURN

Data box menu

4.Use the Trackball to select an item, then press the EDIT soft key.

5.Select ON or OFF as desired.

6.Press the ENTER soft key or the ENTER knob to register your selection. Six items may be set to ON for small data boxes; two for large data boxes.

7.Repeat steps 4-6 to turn other items on or off.

8.Press the MENU key to close the menu.

7-21