Furuno 1824C manual Plotter, Sounder

PLOTTER

▲

{ SIMULATION

~ LIVE

▼

1. OPERATIONAL OVERVIEW

NavNet radar antenna-generated echoes (not available with the GD-1920C)

1.Select GET RADAR SIMULATION DATA, then press the EDIT soft key.

2.Select YES, then push the ENTER knob to erase simulation data and get new data. The message “Now getting demo data. Do not turn off display unit.” appears while the unit is receiving radar data.

Note: If the network radar could not be found “Radar source is not found. Cannot get demo data.” appears. And if the radar is not active, the message “Radar is not active. Cannot get demo data.” is displayed. Check that the radar is plugged in and its signal cable is firmly fastened.

3.Select RADAR, then press the EDIT soft key.

4.Select SIMULATION 2, then push the ENTER knob.

5.Press the MENU key to close the menu.

Plotter

1. Select PLOTTER, then press the EDIT soft key.

2. Select SIMULATION, then push the ENTER knob.

3. Select SPEED, then press the EDIT soft key.

4. Enter speed (setting range, 0-99 kt, default speed, 0 kt) with the alphanumeric keys, then push the ENTER knob.

5.Select COURSE, then press the EDIT soft key.

6.Select “8 FIGURE” to trace the simulated ship’s track in a figure-eight course, or enter your own course at DIRECTION. To enter course, use the Trackball to select digit, and enter value with the alphanumeric keys.

7.Press the ENTER soft key.

8.Select LATITUDE, then press the EDIT soft key.

9.Enter latitude (setting range, 85°N-85°S, default setting, 45°35.000’N), then push the ENTER knob.

10.Select LONGITUDE, then press the EDIT soft key.

11.Enter longitude (setting range, 180°E-180°W, default setting, 125°00.000’W), then push the ENTER knob.

12.Select START DATE & TIME, then press the EDIT soft key.

13.Enter start date and time, then push the ENTER knob.

14.Press the MENU key to close the menu.

Sounder

1.Select SOUNDER, then press the EDIT soft key.

2.Select BUILT IN DATA (internally generated echoes) or ETR (network sounder-generated echoes), then push the ENTER knob.

Note: The depth, shift, bottom-zoom, bottom-lock and bottom discrimination cannot be shown in the BUILT IN DATA mode.

3. Press the MENU key to close the menu.

SOUNDER

▲

{BUILT IN DATA

{ETR DATA

~LIVE

▼

1-17