Furuno 1824C Display unit test results, GPS sensor test Requires GPS Receiver GP-310B/320B

8. MAINTENANCE, TROUBLESHOOTING

Display unit test

Press the DISPLAY UNIT TEST soft key at the MEMORY I/O TEST menu to test the display unit. The equipment displays program version number and checks devices. Results for device checks are shown as OK or NG (No Good). For any NG, request service. A test connector is required to check ports. “ - - “ shown when no test connector is connected. Chart number shown when chart is inserted. Press the RETURN soft key to return the MEMORY I/O TEST menu.

* = For NAVIONICS model. 1950024XX for C-MAP

No results appear when "sub" radar selected as radar source.

Program No. 1950023XX*

ROM1	: OK
ROM2	: OK
SDRAM	: OK
SRAM	: OK
INT. BATTERY	: OK
PORT
NMEA IN/OUT 1	: - -
NMEA IN/OUT 2	: - -
NMEA IN	: - -
RS232	: - -
HEADING	: 352.2°
NETWORK	: - -
CARD SLOT	:
FPGA No.	: OK
HEADING PULSE	: OK
BEARING PULSE	: OK (XX.Xrpm)
TOTAL ON TIME	: 000000.0 h
TOTAL TX TIME	: 000000.0 h

Machine Status +130

Program No. 1950023XX*

ROM1	: OK
ROM2	: OK
SDRAM	: OK
SRAM	: OK
INT. BATTERY	: OK
PORT
NMEA IN/OUT 1	: - -
NMEA IN/OUT 2	: - -
NMEA IN	: - -
RS232	: - -
HEADING	: 352.2°
NETWORK	: - -
FPGA No.	: OK

Machine Status +130

XX = Program Version No.	XX = Program Version No.
Model 18x4/19x4 series	GD-1920C

Display unit test results

GPS sensor test (Requires GPS Receiver GP-310B/320B)

Press the GPS SENSOR TEST soft key at the MEMORY I/O TEST menu to test the GPS Receiver GP-310B/320B. The equipment displays GPS receiver program version number, and checks the GPS unit for proper operation, displaying OK or NG (No Good) as the result. For NG, request service. Press the RETURN soft key to return the MEMORY I/O TEST menu.

PROGRAM No. *48502180XX

GPS UNIT : OK

Machine Status +115

*: This is for GPS-310B, "48502380XX" appears for GPS-320B.

XX = Program Version No.

GPS receiver test results

8-8