1. OPERATIONAL OVERVIEW

1.8Data Boxes

Data boxes, providing navigation data, may be shown on any full-screen display. Up to six data boxes (two in case of large characters) may be shown, and the default data boxes are position (in latitude and longitude), course over ground, speed over ground and trip log. The user may choose which data to display, where to locate it, and show or hide it as desired. In addition, data boxes may be set independently for each display mode (plotter, radar, sounder). For how to select data for the data boxes, see the paragraph “7.5 Data Boxes Setup.”

Data boxes

3nm

12/LP319. 9°M

H-UP

TRIP LOG 177nm

POSITION

COG

SOG

47°58.535'N

323.6°M

 

122°36.496'W

20.0 kt

SIGNAL

PROC.

RADAR

DISPLY

NAV

FUNC

TARGET

ZOOM &

D. BOX

+359.9 ˚R 11.70nm

Data boxes

34° 22.

3456'N

359.9°M

TRIP

NU

080° 22.

3456'E

19.9 kt

99.9 nm

 

16.0nm

MARK

 

ENTRY

 

MODE

 

NTH UP

NAV

POS

WP-002 FISH

 

D. BOX

TRIP LOG

 

177nm

 

ON/OFF

POSITION

COG

SOG

47°58.535'N

323.6°M

 

122°36.496'W

20.0 kt

Radar Display

Data boxes

Plotter Display

1.8.1Showing, hiding data boxes with soft key

Plotter: D. BOX ON/OFF

Radar: ZOOM & D. BOX D. BOX ON/OFF (EBL/VRM data box, cursor data box also shown/hidden)

Sounder: AUTO/D. BOXD. BOX ON/OFF

1.8.2Rearranging data boxes

You may select the location for data boxes as follows:

1.Using the Trackball, place the cursor inside the data box you wish to move. As the cursor enters the box it changes to a “hand”. Push the ENTER knob, and the hand changes to a fist, meaning the box is correctly selected.

2.Use the Trackball to move the data box to the location desired, then push the ENTER knob.

1.8.3Temporarily erasing a data box

If a data box is obscuring a desired object, you may temporarily erase the box. Use the Trackball to place the cursor inside the data box you wish to erase, then press the CLEAR key. To redisplay the box, press the D. BOX soft key twice to display it.

1-14

Page 25
Image 25
Furuno 1824C Data Boxes, Showing, hiding data boxes with soft key, Rearranging data boxes, Temporarily erasing a data box