Furuno 1824C manual Changing own ship track/mark distribution setting, Track plotting interval

3. PLOTTER OPERATION

5.Press the ENTER soft key.

6.Press the MENU key to close the menu.

Track plotting interval

1.Press the MENU key followed by the CHART SETUP and TRACKS & MARKS CONTROL soft keys to open the TRACK CONTROL menu.

2.Use the Trackball to select TIME INTERVAL or DISTANCE INTERVAL as appropriate.

3.Press the EDIT soft key to display the time or distance interval window, depending on what you selected at step 2.

TIME INTERVAL

00m10s

Setting range: 0 min 1 sec (continuous) - 99 min 59 sec

Default setting: 10 sec

(When selecting TIME INTERVAL.)

DISTANCE INTERVAL

00.10nm

Setting range: 0.00 nm (continuous) - 99.99 nm (km, sm)

Default setting: 0.1 nm

(When selecting DISTANCE INTERVAL.)

Interval windows

4.Use the Trackball to select digit and enter value with the alphanumeric keys. The CLEAR soft key functions to clear an entire line of data.

5.Push the ENTER knob or ENTER soft key.

6.Press the MENU key to close the menu.

3.6.5Changing own ship track/mark distribution setting

The equipment stores a total of 8000 points of track and marks. This amount may be distributed as desired, and the default setting is 2000 points of track and 6000 points for marks.

When you change the track memory setting, all tracks and marks in the memory are erased. If necessary save the data to a memory card. For further details see the paragraph “6.1.2 Saving data to a memory card.”

1.Press the MENU key followed by the CHART SETUP and TRACKS & MARKS CONTROL soft keys to open the TRACK CONTROL menu.

2.Use the Trackball to select MEMORY (TRACK & MARK).

3.Press the EDIT soft key to display the track memory window.

TRACK MEMORY

2000/8000 POINTS

Track memory window

4. Use the Trackball to select digit and use the alphanumeric keys to enter value.

3-21