Furuno 1824C manual Alarms, Audio alarm on/off, Plotter alarm menu, Audio alarm window

3. PLOTTER OPERATION

3.11 Alarms

The plotter section has eight conditions which generate both audio and visual alarms: arrival alarm, anchor watch alarm, XTE (Cross Track Error) alarm, proximity alarm, speed alarm, trip alarm, water temperature alarm and bottom alarm. (The bottom and water temperature alarms, which require depth and water temperature data, may also be set on the sounder alarm menu. For these alarms see Chapter 4.)

You may set up the plotter alarms on the ALARM menu, which may be displayed by pressing the ALARM key.

AUDIO ALARM	INTERNAL BUZZ
ARRIVAL ALARM	OFF 0.010nm
ANCHOR WATCH ALARM	OFF 0.010nm
PROXIMITY ALARM	OFF
XTE ALARM	OFF 0.050nm
SPEED ALARM	OFF
TRIP ALARM	OFF 0000.0nm
ALARM INFORMATION
NO ALARM

ALARM1

EDIT

GALRM REPORT*

CLEAR

ALARM

NEXT

PAGE

RETURN

NEXT

PAGE

PREV.

PAGE

BOTTOM ALARM	OFF
TEMPERATURE ALARM	OFF
GROUNDING ALARM	OFF*

GROUNDING ALARM RANGE*

ALARM INFORMATION

NO ALARM

ALARM2

EDIT

GALRM REPORT*

CLEAR

ALARM

PREV.

PAGE

* C-MAP specification only

Page 1

Page 2

Plotter alarm menu

3.11.1 Audio alarm on/off

Audio and visual alarms are released whenever an alarm setting is violated. You can enable or disable the audio alarm as follows:

1.Press the ALARM key to show the alarm menu.

2.Use the Trackball to select AUDIO ALARM.

3.Press the EDIT soft key to show the audio alarm window.

AUDIO ALARM

§INT & EXT BUZZ °INTERNAL BUZZ

OFF

Audio alarm window

4.Use the Trackball to select INT & EXT BUZZ (Internal + External alarm), INTERNAL BUZZ (Internal alarm) or OFF as appropriate. This turns on or off the audio alarm globally for all alarms, including radar.

5.Press the ENTER soft key.

6.Press the ALARM key to finish.

3-47