Furuno 1824C manual AP-3, Setup

APPENDIX

2

	SYSTEM		PORT	DATA 1:	OUTPUT FORMAT
	SETUP		SETUP	GPS/NMEA	(NMEA 0183 Ver.1.5, 2.0)
				PORT	LAT/LON FORMAT
					(DD° MM. MM’
					DD° MM. MMM’
					DD° MM. MMMM’)
					XTE FORMAT (X.XX, X.XXX)
					OUTPUT DESTINATION
					(YES, NO)
					SELECT SNTNC soft key*
				DATA 2:	PORT MNITR soft key*	CLEAR WINDOW
					OUTPUT FORMAT
				NMEA PORT	(NMEA 0183 Ver.1.5, 2.0)
					BAUD RATE
					(AUTO, 4800 bps, 38400 bps)
					LAT/LON FORMAT
					(DD° MM. MM’
					DD° MM. MMM’
					DD° MM. MMMM’)
					XTE FORMAT (X.XX, X.XXX)
					OUTPUT DESTINATION
					(YES, NO)
					SELECT SNTNC soft key*		CLEAR WINDOW
					PORT MNITR soft key*
				DATA 4:	NMEA OUTPUT FORMAT
				PC/NMEA/	(NMEA Ver.1.5, 2.0)
				EXT. BUZZ	BAUD RATE
				PORT	(4800, 9600, 19200 bps)
					BIT LENGTH (7 bits, 8 bits)
					STOP BIT (1 bit, 2 bits)
					PARITY
					(EVEN, ODD, NONE)
					SELECT SNTNC soft key*
4		3
					PORT MNITR soft key*	CLEAR WINDOW
				OUTPUT THROUGH NETWORK
				(Select data sentences to output to NavNet
				equipment. See * below. All sentences turned off in default setting.)
			* = AAM, APB, BOD, BWR(BWC)#1, DPT(DBT)#2, GGA, GLL, GTD,
			MTW, RMA, RMB, RMC, VHW, VTG, WPL, XTE, ZDA, HDT, HDG, MWV, ZTG, TTM

(except in case of OUTPUT THROUGH NETWORK)

#1= BWR for rhumb line, BWC for great circle

#2 = DBT for NMEA Ver. 1.5; DPT for NMEA Ver. 2.0

AP-3