1. MOUNTING
7.If the gap at a side is more than 0.5 mm, install shim(s) to make the gap within 0.5 mm.
a)Unscrew four M10x50 bolts.
b)Unscrew four countersunk screws, then attach shim(s) with the countersunk screws as shown below.
Nut
Flat washer
Countersunk screw (M4x16)
Hex. bolt
Guide plate
(M10x70)
Shim (1.0)
Flat washer | Shim (1.5) |
Spring washer
Hex. bolt (M10X50)
