1. MOUNTING
Note 2: When the soundome is painted (to keep marine life off the transducer), observe the following precautions:
•Use only
•Paint only the plastic portion of the dome. Painting the metal parts causes electric corrosion.
Paint area
20.Clean surface of gasket, tank flange and shaft sleeve, and then coat flange gasket with ADHESIVE 1104 200G.
21.Lightly coat bolts, nuts and washers with KINORUSTER.
22.Set the hull unit into the retraction tank, taking care not to damage the soundome.
Flange assembly
Flange gasket
Retraction tank flange
Shaft retainer
Spring washer |
Hex. bolt M10X35 |
Nut
Spring washer
Flat washer
Bow mark
Flat washer
Hex. bolt M20X80
