Furuno CH300 manual Vga Nav

2.4Interface Unit

DATA/VIDEO IN DATA/VIDEO OUT RGB OUT

CONT NMEA

Transceiver unit cable	VGA	NAV	Earth
06S4078	monitor	Control	Connect to ship's earth.
Monitor unit		unit
cable		cable
06S4078		MJ-A10SPF0002
		(1.5/5 m)

The blackbox type requires connection of a VGA monitor, via the interface unit IF-8000. Supply monitor and interconnection cable (Max. length 15 m with Dsub-15P connectors of male, three rows of 15 pins). The monitor used should satisfy the specifications shown below.

•VGA type

•ANALOG RGB 0.7 Vpp, positive polarity

•TTL level H, V, Negative polarity

Note 1: Two interface units can be connected to the transceiver unit in parallel.

Note 2: When using DATA/VIDEO OUT port, cut and remove the rubber covers as below to attach connectors to the interface unit.

Remove the fixing metals.

Cut and remove the covers.

Note 3: Connect control unit or navigator equipment to either interface unit or monitor unit (supplied by FURUNO).

Note 4: When connecting the monitor unit MU-100C to the interface unit, or two interface units in parallel to the transceiver unit, the length of cables should be as shown in the figure on next page. Note that two cables 06S4078 (10 m length) cannot be used.

2-7