Furuno CH300 manual Interface Unit

1. MOUNTING

1.5Interface Unit

The interface unit is shipped with the blackbox type to enable connection of a monitor. Note that this unit is not necessary when using monitor MU-151C.

1.5.1General mounting considerations

•The mounting location should be well ventilated and dry. Avoid locations subject to water splash or rain.

•The unit can be mounted on a bulkhead or the deck.

•The maximum cable length between the interface unit and the transceiver unit is 10 m. Keep the length in mind when choosing a mounting location.

External monitor

Transceiver 06S4078

unit

A

Interface

unit

06S4078

B

Monitor unit

MU-100C

A+B<=15m

		External			External
		monitor			monitor
	06S4078		06S4078
Transceiver		Interface			Interface
unit	A	unit		C	unit

1.5.2Mounting method

A+C<=15m

Fasten the interface unit with four self-tapping screws (5X20, local supplied). For bulkhead mounting, do as follows:

1.Tighten upper self-tapping screws so there is 5 mm clearance between bottom of screw head and bulkhead.

2.Hook the transceiver unit on the upper screws.

3.Tighten the upper screws followed by the lower screws.

335

	295	4- 6
		FIXING HOLES
	23
120	79+0.5	137

315+0.5

1-22