Furuno CH300 manual Bracket rear view

1. MOUNTING

	Bracket (rear view)
	1	2
1	2
3	4	4
	3

Bracket, rear view

4.Coat threads of upset screws (M6x16, 2 pcs.) used to fasten bracket to mounting base.

5.Fasten the bracket to the mounting base with two upset screws. (Use the upper holes to tilt the monitor unit 20°; lower holes to tilt it 9°.)

Flush mounting for monitor unit (Type: OP06-17, Code no. 006-556-310)

Name	Type	Code No.	Qty	Remarks
Fixing metal	06-021-1321-2	100-279-622-10	1
Self-tapping screw	5x20	000-162-609-10	4
Hex. bolt	M4x12	000-162-939-10	4

1.Cut out a hole (W287 x H207) in the mounting location.

2.Fasten the fixing metal (supplied) to the monitor unit with four hex. bolts (M4x12, supplied).

3.Fasten the fixing metal assembled at step 2 to hole made at step 1 with four self-tapping screws (5x20, supplied).

Hex. bolts

Fixing metal

1-4