Fusion F300S, F300SQ Warranty Policy, Figure 4. P300M Front Panel

Figure 4. P300M Front PanelWarranty Policy

Items manufactured by Fusion UV Systems Incorporated are warranted (under normal and proper use) to be free from defects in material and workmanship. Fusion UV Systems will repair or replace, at its option, any defective parts when returned to Fusion by the purchaser, transportation paid. See the Terms & Conditions included with your sales order for the length of the warranty period.

Equipment may not be returned, whether for warranty or other purposes, without prior authorization and issuance of a Returned Material Authorization Number by Fusion UV Systems. After inspection and acceptance, equipment returned for credit will be subject to a handling and restocking charge.

Fusion UV Systems assumes no expense or liability for repairs made outside its plant without written consent nor for any labor costs which are so incurred. For equipment manufactured by others, Fusion UV Systems will pass along to the purchaser whatever warranty it receives and will not be responsible for any incurred expense outside of such warranty.

If repair of equipment is required but return of such equipment to Fusion UV Systems is not feasible, then by mutual consent of Fusion and the purchaser, an authorized Fusion UV service representative will be sent to the purchaser’s plant to effect necessary repairs. The purchaser will be charged for the representative’s time and expense.

The two consumable items in a Fusion UV lamp system are the lamp bulb and the microwave power tube (magnetron). The special warranties on these components are detailed on the sales contract.

Installation, Operation, and Maintenance Manual # 509252 Rev R 21