NOTE: Any repairs or alterations, including the use of non-Fusion UV Systems (Fusion) parts, made by the user of this product without Fusion UV Systems’ prior written consent shall void all warranties provided by Fusion UV Systems and such warranties shall cease to be in effect. No allowance will be granted for such repairs or alterations. No person, agent, representative, or distributor is authorized to give any warranties on behalf of Fusion UV Systems, or to accept for Fusion UV Systems any other liability in connection with any of Fusion UV Systems’ products.

Shipping Instructions

Read the following sections carefully to ensure compliance with the requirements and recommendations for returning products or components, whether for credit, replacement, or repairs.

Returned Material Authorization Number

Equipment may not be returned, whether for warranty or other purposes, without prior authorization and issuance by Fusion UV Systems of a Returned Material Authorization Number. After inspection and acceptance, equipment returned for credit will be subject to a handling and restocking charge. Returned equipment must be shipped prepaid.

General Packing Instructions

If possible, original packaging materials should be reused for return shipment to Fusion UV Systems. If Fusion UV Systems’ packaging materials are not used, equivalent packaging, as outlined in the following sections, is to be used.

Power Supply

Secure the chassis to the cover by M5 x 12 mm screws. (There are three on each side of power supply for the P300M/P300MQ, two on each side of power supply for the P300MT.)

Box:Bursting Test: 24 kg/cm2 (350 lbs./sq. in.)
Gross Weight Limit: 70 kg (155 lbs.)
Fills:

Rigid high density styrofoam or cardboard fills as required to

 

ensure power supply does not shift in box during shipment.
CAUTION: Packaging materials should not push against connectors or controls.

22F300S/F300SQ Ultraviolet Lamp System