Heart Rate Monitor Battery

warning

Do not use a sharp object to remove user‑replaceable batteries.

Contact your local waste disposal department to properly recycle the batteries. Perchlorate Material – special handling may apply. See www.dtsc

.ca.gov/hazardouswaste/perchlorate.

Replacing the Heart Rate Monitor Battery

1Use a small Phillips screwdriver to remove the four screws on the back of the module.

2Remove the cover and battery.

3Wait 30 seconds.

4Insert the new battery with the positive side facing up.

NOTE: Do not damage or lose the O-ring gasket.

5Replace the back cover and the four screws.

After you replace the heart rate monitor battery, you must pair it with the device again (page 22).

Appendix

Registering Your Device

Help us better support you by completing our online registration today.

•Go to http://my.garmin.com.

•Keep the original sales receipt, or a photocopy, in a safe place.

44

Appendix