Pairing Your ANT+ Sensors
Before you can pair, you must put on the heart rate monitor or install the sensor. See the quick start manual or the accessory instructions.
If your Forerunner does not show data from the accessory, you may need to pair the accessory to your Forerunner. Pairing is the connecting of ANT+™ wireless sensors, for example, connecting your foot pod with a Forerunner. After you pair the first time, your Forerunner automatically recognizes your foot pod each time it is activated.
•Make sure the ANT+ sensor is compatible with your Forerunner.
•Bring the Forerunner within 3 m of the ANT+ sensor.
•Stay 10 m away from other ANT+ sensors while pairing.
•If is off, select MODE > Settings > Run Settings > Heart Rate > ANT+ HR > Yes > Restart Scan.
•If is off, select MODE > Settings > Run Settings > Foot Pod > Yes > Restart Scan.
•If is off, select MODE > Settings
>Bike Settings > bike name > ANT+ Spd/Cad > Yes > Restart Scan.
•If is off, select MODE > Settings
>Bike Settings > bike name > ANT+Power > Yes > Restart Scan.
•If you still cannot pair the accessory, replace the accessory battery (see page 44 or accessory instructions).
When the accessory is paired, a message appears, and the accessory icon (page 5) appears solid on the screen.
Heart Rate Monitor
NOTE: The Forerunner cannot record heart rate data while swimming.
Putting on the Heart Rate Monitor
NOTE: If you do not have a heart rate monitor, you can skip this task.
Wear the heart rate monitor directly on your skin, just below your breastplate. It should be snug enough to stay in place during your run.
1Connect the heart rate monitor module ➊ to the strap.
22 | ANT+ Sensors |