For calibration instructions specific to your power meter, refer to the manufacturer’s instructions.

1Select MODE > Settings > Bike Settings > bike name > ANT+Power.

2Select Yes in the Power meter present field.

3Select Calibrate.

4Keep your power meter active by pedaling until the message appears.

Setting Your Power Zones

Before you configure power zones, you must be in bike sport mode.

You can set seven custom power zones (1=lowest, 7=highest). If you know your functional threshold power (FTP) value, you can enter it and allow the Forerunner to calculate your power zones automatically.

1Select MODE > Settings > Bike Settings > bike name > Power Zones.

2Select an option:

•Select % FTP to view and edit the zones as a percentage of your functional threshold power.

•Select Watts to view and edit the zones in watts.

Non-Zero Averaging for Power Data

The non-zero data-averaging setting is available if you are training with an optional power meter. The default setting is to include zero values that occur when you are not pedaling.

To turn the non-zero averaging on or off, select MODE > Settings > Bike Settings

>Data Averaging > Power.

Data Recording

When a third-party power meter (page 26) is paired, the Forerunner records points every second. Recording points every second uses more of the available memory on the Forerunner, but creates a very accurate record of your ride.

Weight Scales

Using the Weight Scale

If you have an ANT+ compatible weight scale, the Forerunner can read the data from the weight scale.

1Select MODE > Settings > System > Weight Scale ANT+.

ANT+ Sensors

27