Garmin 910XT About Foot Pod Calibration, Calibrating Your Foot Pod by Distance, Calibrating Your Foot Pod by GPS, Calibrating Your Foot Pod Manually, GPS, STOP, START

About Foot Pod Calibration

Calibrating your foot pod is optional and can improve accuracy. There are three ways to adjust the calibration: distance, GPS, and manual.

Calibrating Your Foot Pod by Distance

For best results, the foot pod should be calibrated using the inside lane of a regulation track. A regulation track (2 laps = 800 m) is more accurate than a treadmill.

1Select MODE > Settings > Run Settings > Foot Pod > Calibrate >

Distance

2Select a distance.

3Select Continue > START to begin recording.

4Run or walk the distance.

5 Select STOP.

Calibrating Your Foot Pod by GPS

You must have GPS signals to calibrate the foot pod using GPS.

1Select MODE > Settings > Run Settings > Foot Pod > Calibrate >

GPS.

2Select Continue > START to begin recording.

3Run or walk approximately 1000 m.

The Forerunner informs you that you have traveled far enough.

Calibrating Your Foot Pod Manually

If your foot pod distance seems slightly high or low each time you run, you can manually adjust the calibration factor.

1Select MODE > Settings > Run Settings > Foot Pod > Calibration Factor.

2Adjust the calibration factor.

•Increase the calibration factor if your distance is too low.

•Decrease the calibration factor if your distance is too high.

ANT+ Sensors 25