On the compass, the arrow ➊ points toward the location. The compass also displays the distance ➋ and time ➌ to the location.
➊➋
➌
Editing or Deleting a Location
1Select MODE > GPS > Go to Location.
2Select a location.
3Edit the information or select Delete.
Navigating Back to Start
Before you can navigate to your starting location, you must be training with GPS, and you must start the timer.
At any point during your run, you can return to your starting point.
During your run, select MODE > GPS
>Back to Start.NOTE: If you are using every second recording (page 34), it may take several seconds to determine your starting location.
The map appears. A line appears on the map from your current location to your starting point.
Stopping Navigation
Select MODE > GPS > StopNavigation.Viewing GPS Information
1Select MODE > GPS > Satellites.The satellite strength information appears. The black bars represent the strength of each satellite signal received (the number of the satellite appears below each bar).
2Select ▲ or ▼ to view the satellite page.
The satellite page displays information about the GPS signals the Forerunner is currently receiving.
For more information about GPS, go to www.garmin.com/aboutGPS.
Navigation | 33 |