CHAPTER 6: Troubleshooting
4Insert a blank, recordable disc into a recordable disc drive, then click Next. If an AutoPlay dialog box opens, click the x in the
A dialog box opens that tells you the number of blank discs you will need to create a full set of recovery discs.
5If you have enough blank discs of the specified type, click I have enough discs, then click Next. If you do not have enough discs, choose a different disc type, or click Cancel.
The disc recording begins. Label the discs as they are completed.
Important
Use a permanent marker to label each disc “Software and Driver Recovery,” along with a short description of which computer the discs are for. If you are recording multiple discs, as you remove each disc from the drive, use the marker to label each disc 1 of x, 2 of x, 3 of x, and so on.
Tip
After a recovery disc is created, your computer names the disc Recovery13 for disc 1 of a
6If multiple discs are required, insert the additional blank disks when prompted.
7When the process is finished, the Congratulations! window opens.
8Click Finish.
9Remove your final disc, then label all of the discs and store them in a safe place.
100