Replace the front bezel by following the instructions in “Replacing the front bezel” on page 32.
Reconnect the drive cables using your notes from Step 4, or according to the manufacturer’s instructions.
8
9
10 Replace the side panel by following the instructions in “Replacing the side panel” on page 33.
CHAPTER 4: Upgrading Your Computer
6 Remove the two drive retention screws, then slide the drive forward and out of the drive bay.
Drive retention screws
7 Slide the new drive into the drive bay, line up the screw holes on the drive bay withthe screwholesonthe drive, then replace the two drive retention screws.
Drive retention screws

38