www.gateway.com
8If youarereplacingan old drive,remove the fourscrews that secure the hard drive to the hard drive bay, then remove the hard drive from the bay.
Screws |
|
|
|
|
| Screws |
|
|
| ||||
|
|
|
|
|
|
|
- OR -
If you are adding a new drive (not replacing an old one), remove the four screws (two on each side) from the empty hard drive bay.
9If you are replacing a drive, note any jumper settings on the old drive and set the jumper on the new drive to be the same. If you are adding a new drive, set the jumper as instructed by the drive’s user guide.
Jumper
10Slide the new drive into the drive bay, then secure the drive to the bay using the four screws you removed previously.
43